A heavy duty industrial resilient seated butterfly valveGRW - Wafer body designGRL - Lugged body design. Water, air, dry bulk conveying etc. These valves are for any service where a drop-tight shut-off with maximum flow area is required.

A heavy duty double flanged concentric design resilient seated butterfly valve. These valves are for water or air service where a drop-tight shut-off and double flanged body are required.

An economical bonded resilient seated butterfly valve for bi-directional and end-of-line service• F221 Wafer style valve• F222 Lugged style valve. Ideal for building services and irrigation applications that require shut-off control. The valve has a moulded in seat and can be used in full vacuum service.

A split body thin disc valve for high flow and modulating serviceFigure 990 - Wafer body design. Figure 920 - Lugged body design. Figure 990 and 920 valves are used when modulating service or corrosion resistance is required. Heavy duty applications include food and beverage, pharmaceutical, pulp and paper, mining, oil & gas and power industries. Available with PTFE lining for light corrosive services and rubber lining for light abrasive services.

The Fisher A31D is a double-flange, high performance butterfly valve featuring either a splined drive shaft or a keyed drive shaft. The A31D is used in throttling or on/off service and is available in NPS 3 through 12, CL150 and CL300.

K-LOK Figure 360/362 - ASME 150K-LOK Figure 370/372 - ASME 300. • Airport refueling • Hydrocarbon processing • HVAC • Chemical processing • Purified gas • Steam and vacuum services • Potable water • Food processing • Sour gas • Military • Oxygen • Pharmaceutical • Ammonia • Chlorine • Reverse osmosis • Category ‘M’ fluids • Slurry • Modulating control

A PTFE lined solution according ISO 5752/5 short (EN 558-1/T5) with various corrosion resistant disc materials. The valves are ideally suited for corrosive applications, requiring reliable performance, tight shutoff, constant torque and no maintenance. The valves successfully handle a multitude of corrosive applications in industries such as chemical, petro-chemical, pulp and paper, semiconductor (UPW), foundries and mining.

The Vanessa Series 30,000 is a robust triple offset valve featuring an integral-to-body valve seat and optimized seating angles, that enables the Series 30,000 to handle isolation and process control through multiple functionalities.

The design of the Virgo TOV provides a non-rubbing, open/close operation. Unlike conventional butterfly and gate valves, whose seats are chafed with every stroke, the Virgo TOV uses a triple offset design to prevent seat wear. This means superior performance, lower maintenance, and a longer life for your valves. The versatility of the design allows for use in large variety of applications and within a broad range of operating temperatures.

Yarway is focused on the small-bore, high-pressure vent, drain and blow-off, and continuous blowdown applications of heat-recovery steam generators. In-line repairable, Yarway valves offer the lowest application lifecycle costs for power plant operators.

Dual plate, spring loaded, wafer style design for the protection of gas or liquid piping systems

Hancock valves provide cast and forged steel gate, globe, and check valves suitable for most power, petroleum, chemical, petrochemical, and general industry process applications. With a proven reputation for economical service established over 100 years ago, Hancock offers a complete range of carbon steel and stainless steel valves up to ASME Class 1500 in sizes DN 15 - 600 (NPS ½ – 24), with a choice of end connections including screwed, socket weld, flanged, or butt weld.

Sempell forged gate, globe, and check valves serve the DIN and ASME power generation markets. Applying cutting-edge material science and valve designs, Sempell isolation and non-return valves are designed for all types of power plants, including nuclear and supercritical plants, which operate at temperatures up to 720°C.

The Clarkson KGA slurry knife gate valves feature heavy-duty, full port elastomer sleeves offering the ultimate isolation against heavy slurries. • Mining • Power • Pulp and paper • Alumina • Chemical • Cement

The Clarkson KGD wafer style slurry knife gate valve offers the latest in elastomer technology with the Mark III sleeve design. Mining • Power • Pulp and paper • Phosphates • Steel/Metals • Chemical • Cement

Bi-directional zero leakage ASME Class 150 rated knife gate valve.Designed for the rigors of high pressure slurry and oil sands applications

Lugged style, uni-directional knife gate valves.

Offering complete solutions in full port & reduced port vales from ½” to 12”, automated & manual